Daimachi

---

$48.39 + $ 30.00 to US by ePacket/EMS..

Product Code: YNNVUXPIUH

• SOLD OUT

How to use GT-1 is easy to use. Connect the BNC plug on the RX display side to the antenna input of the receiver and the cable from the antenna to the BNC jack on the side labeled ANT. If necessary, connect a conversion adapter or receiver to the GT - 1 with a short coaxial cable of about 10 to 20 cm. GT - 1 is an isolation transformer that reduces the influence from noise by blocking the loop noise caused by the ground loop. There is no effect on noise due to causes other than the ground loop and external noise jumping directly into the antenna. If you are using a laptop PC, you can expect a noise attenuation effect in the GT-1 if noise is seen when using it with a battery. Function: Insulation transformer Frequency range: 40 kHz to 30 MHz Insertion loss: Maximum 3 dB Input / output impedance: 50 Unbalanced connector shape: BNC - P (receiver side): BNC - J (antenna side) Dimensions (excluding connectors): 34.5 X 50 x 25 mm Weight: Approx 50 g GT - 1 is for receive only. It can not be used for transmission. : AOR PartNumber: GT1 ProductTypeName: ACCESSORY_OR_PART_OR_SUPPLY ProductGroup: CE Brand: AOR PackageDimensions: 2.48 cm x 11.98 (AOR Partition Number: AOR Package Quantity: 1 Model: GT 1 Label: AOR Title: AOR GT - 1 Galvanic Isolation Transformer Studio: Cm x 18.99 cm Feature: Galvanic Isolation To those who are troubled with trans noise! Effect on receiving noise suppression! This an insulation transformer dedicated to reception that attenuates artificial reception noise and improves the reception state by installing it between the receiver and the antenna. Effective for receivers controlled by PC such as Perseus receiver, receiver using switching power supply. VLF Suitable for MF band reception. It can be used over the entire 40 kHz to 30 MHz band. Since the antenna and the receiver are electrically insulated, the receiver can be protected from the static electricity induced in the antenna. Manufacturer: AOR