Daimachi

---

$27.65 + $ 30.00 to US by ePacket/EMS..

Product Code: YNUJWJGTDR

• SOLD OUT

A fish tail end mill with a shaft diameter of 3.175 mm (1/8 in standard) and a carbide blade tip diameter of 1.2 mm. It can also be used on equipment with a small shaft diameter, such as small CNC prototype machines. It can be used both as a drilling dollar and as an end mill. Since it is an end mill, it can be used for cutting, but it is necessary to cut it carefully because the blade tends to chip. Speed of end mill Depending on the material to be cut, the rotation speed and feed rate must be appropriate values. For commercial machines, even if the recommended feed rate is around F200, hobby machines with a price of 100,000-200,000 may be damaged or fail if the feed rate is too fast, so slow to around F20-50. And should be at speed. If you are unfamiliar, try cutting at a rotation speed of 2000 rpm and a feed rate of F30. The number of revolutions depends on the diameter of the end mill tip. If you want to perform efficient cutting, the basics of the end mill give detailed information the concept of settings, such as the recommended values for the rotation speed and feed rate for each material, so please check there. CAUTION Since a drilling tool with a diameter of 1 mm or less is very fragile, teeth are cut at right angles to the cut object. Input ItemDimensions: 0.4 cm x 0.4 cm x 5 cm Studio: Pepales Manufacturing Co., Ltd.Part Number: TR-FE12 Size: Tip 1.2mm ProductGroup: Home Improvement Feature: D (tip diameter): 1.2mm Total length: 38mm Shaft diameter: 3.175mm ( It has been confirmed that the material is a carbide blade. You can use both drill end mills Manufacturer: Pepaless Manufacturing Co., Ltd. Binding: Other MPN: TR-FE12 EAN: 4573133555830 Publisher: Pepaless Manufacturing Co., Ltd. ProductTypeName: TOOLS Brand: Pepaless Manufacturing Co., Ltd. PackageDimensions: 2.99 cm x 13.99 cm x 16 cm